EventLoop
, (*1)
ReactPHP's core reactor event loop that libraries can use for evented I/O., (*2)
In order for async based libraries to be interoperable, they need to use the
same event loop. This component provides a common LoopInterface that any
library can target. This allows them to be used in the same loop, with one
single run() call that is controlled by the user., (*3)
Table of contents, (*4)
Quickstart example
Here is an async HTTP server built with just the event loop., (*5)
<?php
use React\EventLoop\Loop;
require __DIR__ . '/vendor/autoload.php';
$server = stream_socket_server('tcp://127.0.0.1:8080');
stream_set_blocking($server, false);
Loop::addReadStream($server, function ($server) {
$conn = stream_socket_accept($server);
$data = "HTTP/1.1 200 OK\r\nContent-Length: 3\r\n\r\nHi\n";
Loop::addWriteStream($conn, function ($conn) use (&$data) {
$written = fwrite($conn, $data);
if ($written === strlen($data)) {
fclose($conn);
Loop::removeWriteStream($conn);
} else {
$data = substr($data, $written);
}
});
});
Loop::addPeriodicTimer(5, function () {
$memory = memory_get_usage() / 1024;
$formatted = number_format($memory, 3).'K';
echo "Current memory usage: {$formatted}\n";
});
See also the examples., (*6)
Usage
Typical applications would use the Loop class to use the default
event loop like this:, (*7)
use React\EventLoop\Loop;
$timer = Loop::addPeriodicTimer(0.1, function () {
echo 'Tick' . PHP_EOL;
});
Loop::addTimer(1.0, function () use ($timer) {
Loop::cancelTimer($timer);
echo 'Done' . PHP_EOL;
});
As an alternative, you can also explicitly create an event loop instance at the
beginning, reuse it throughout your program and finally run it at the end of the
program like this:, (*8)
$loop = React\EventLoop\Loop::get(); // or deprecated React\EventLoop\Factory::create();
$timer = $loop->addPeriodicTimer(0.1, function () {
echo 'Tick' . PHP_EOL;
});
$loop->addTimer(1.0, function () use ($loop, $timer) {
$loop->cancelTimer($timer);
echo 'Done' . PHP_EOL;
});
$loop->run();
While the former is more concise, the latter is more explicit.
In both cases, the program would perform the exact same steps., (*9)
- The event loop instance is created at the beginning of the program. This is
implicitly done the first time you call the
Loop class or
explicitly when using the deprecated Factory::create() method
(or manually instantiating any of the loop implementations).
- The event loop is used directly or passed as an instance to library and
application code. In this example, a periodic timer is registered with the
event loop which simply outputs
Tick every fraction of a second until another
timer stops the periodic timer after a second.
- The event loop is run at the end of the program. This is automatically done
when using the
Loop class or explicitly with a single run()
call at the end of the program.
As of v1.2.0, we highly recommend using the Loop class.
The explicit loop instructions are still valid and may still be useful in some
applications, especially for a transition period towards the more concise style., (*10)
Loop
The Loop class exists as a convenient global accessor for the event loop., (*11)
Loop methods
The Loop class provides all methods that exist on the LoopInterface
as static methods:, (*12)
If you're working with the event loop in your application code, it's often
easiest to directly interface with the static methods defined on the Loop class
like this:, (*13)
use React\EventLoop\Loop;
$timer = Loop::addPeriodicTimer(0.1, function () {
echo 'Tick' . PHP_EOL;
});
Loop::addTimer(1.0, function () use ($timer) {
Loop::cancelTimer($timer);
echo 'Done' . PHP_EOL;
});
On the other hand, if you're familiar with object-oriented programming (OOP) and
dependency injection (DI), you may want to inject an event loop instance and
invoke instance methods on the LoopInterface like this:, (*14)
use React\EventLoop\Loop;
use React\EventLoop\LoopInterface;
class Greeter
{
private $loop;
public function __construct(LoopInterface $loop)
{
$this->loop = $loop;
}
public function greet(string $name)
{
$this->loop->addTimer(1.0, function () use ($name) {
echo 'Hello ' . $name . '!' . PHP_EOL;
});
}
}
$greeter = new Greeter(Loop::get());
$greeter->greet('Alice');
$greeter->greet('Bob');
Each static method call will be forwarded as-is to the underlying event loop
instance by using the Loop::get() call internally.
See LoopInterface for more details about available methods., (*15)
Loop autorun
When using the Loop class, it will automatically execute the loop at the end of
the program. This means the following example will schedule a timer and will
automatically execute the program until the timer event fires:, (*16)
use React\EventLoop\Loop;
Loop::addTimer(1.0, function () {
echo 'Hello' . PHP_EOL;
});
As of v1.2.0, we highly recommend using the Loop class this way and omitting any
explicit run() calls. For BC reasons, the explicit run()
method is still valid and may still be useful in some applications, especially
for a transition period towards the more concise style., (*17)
If you don't want the Loop to run automatically, you can either explicitly
run() or stop() it. This can be useful if you're using
a global exception handler like this:, (*18)
use React\EventLoop\Loop;
Loop::addTimer(10.0, function () {
echo 'Never happens';
});
set_exception_handler(function (Throwable $e) {
echo 'Error: ' . $e->getMessage() . PHP_EOL;
Loop::stop();
});
throw new RuntimeException('Demo');
get()
The get(): LoopInterface method can be used to
get the currently active event loop instance., (*19)
This method will always return the same event loop instance throughout the
lifetime of your application., (*20)
use React\EventLoop\Loop;
use React\EventLoop\LoopInterface;
$loop = Loop::get();
assert($loop instanceof LoopInterface);
assert($loop === Loop::get());
This is particularly useful if you're using object-oriented programming (OOP)
and dependency injection (DI). In this case, you may want to inject an event
loop instance and invoke instance methods on the LoopInterface like this:, (*21)
use React\EventLoop\Loop;
use React\EventLoop\LoopInterface;
class Greeter
{
private $loop;
public function __construct(LoopInterface $loop)
{
$this->loop = $loop;
}
public function greet(string $name)
{
$this->loop->addTimer(1.0, function () use ($name) {
echo 'Hello ' . $name . '!' . PHP_EOL;
});
}
}
$greeter = new Greeter(Loop::get());
$greeter->greet('Alice');
$greeter->greet('Bob');
See LoopInterface for more details about available methods., (*22)
~~Factory~~
Deprecated since v1.2.0, see Loop class instead., (*23)
The deprecated Factory class exists as a convenient way to pick the best available
event loop implementation., (*24)
~~create()~~
Deprecated since v1.2.0, see Loop::get() instead., (*25)
The deprecated create(): LoopInterface method can be used to
create a new event loop instance:, (*26)
// deprecated
$loop = React\EventLoop\Factory::create();
// new
$loop = React\EventLoop\Loop::get();
This method always returns an instance implementing LoopInterface,
the actual event loop implementation is an implementation detail., (*27)
This method should usually only be called once at the beginning of the program., (*28)
Loop implementations
In addition to the LoopInterface, there are a number of
event loop implementations provided., (*29)
All of the event loops support these features:, (*30)
- File descriptor polling
- One-off timers
- Periodic timers
- Deferred execution on future loop tick
For most consumers of this package, the underlying event loop implementation is
an implementation detail.
You should use the Loop class to automatically create a new instance., (*31)
Advanced! If you explicitly need a certain event loop implementation, you can
manually instantiate one of the following classes.
Note that you may have to install the required PHP extensions for the respective
event loop implementation first or they will throw a BadMethodCallException on creation., (*32)
StreamSelectLoop
A stream_select() based event loop., (*33)
This uses the stream_select()
function and is the only implementation that works out of the box with PHP., (*34)
This event loop works out of the box on PHP 5.3 through PHP 8+ and HHVM.
This means that no installation is required and this library works on all
platforms and supported PHP versions.
Accordingly, the Loop class and the deprecated Factory
will use this event loop by default if you do not install any of the event loop
extensions listed below., (*35)
Under the hood, it does a simple select system call.
This system call is limited to the maximum file descriptor number of
FD_SETSIZE (platform dependent, commonly 1024) and scales with O(m)
(m being the maximum file descriptor number passed).
This means that you may run into issues when handling thousands of streams
concurrently and you may want to look into using one of the alternative
event loop implementations listed below in this case.
If your use case is among the many common use cases that involve handling only
dozens or a few hundred streams at once, then this event loop implementation
performs really well., (*36)
If you want to use signal handling (see also addSignal() below),
this event loop implementation requires ext-pcntl.
This extension is only available for Unix-like platforms and does not support
Windows.
It is commonly installed as part of many PHP distributions.
If this extension is missing (or you're running on Windows), signal handling is
not supported and throws a BadMethodCallException instead., (*37)
This event loop is known to rely on wall-clock time to schedule future timers
when using any version before PHP 7.3, because a monotonic time source is
only available as of PHP 7.3 (hrtime()).
While this does not affect many common use cases, this is an important
distinction for programs that rely on a high time precision or on systems
that are subject to discontinuous time adjustments (time jumps).
This means that if you schedule a timer to trigger in 30s on PHP < 7.3 and
then adjust your system time forward by 20s, the timer may trigger in 10s.
See also addTimer() for more details., (*38)
ExtEventLoop
An ext-event based event loop., (*39)
This uses the event PECL extension,
that provides an interface to libevent library.
libevent itself supports a number of system-specific backends (epoll, kqueue)., (*40)
This loop is known to work with PHP 5.4 through PHP 8+., (*41)
ExtEvLoop
An ext-ev based event loop., (*42)
This loop uses the ev PECL extension,
that provides an interface to libev library.
libev itself supports a number of system-specific backends (epoll, kqueue)., (*43)
This loop is known to work with PHP 5.4 through PHP 8+., (*44)
ExtUvLoop
An ext-uv based event loop., (*45)
This loop uses the uv PECL extension,
that provides an interface to libuv library.
libuv itself supports a number of system-specific backends (epoll, kqueue)., (*46)
This loop is known to work with PHP 7+., (*47)
~~ExtLibeventLoop~~
Deprecated since v1.2.0, use ExtEventLoop instead., (*48)
An ext-libevent based event loop., (*49)
This uses the libevent PECL extension,
that provides an interface to libevent library.
libevent itself supports a number of system-specific backends (epoll, kqueue)., (*50)
This event loop does only work with PHP 5.
An unofficial update for
PHP 7 does exist, but it is known to cause regular crashes due to SEGFAULTs.
To reiterate: Using this event loop on PHP 7 is not recommended.
Accordingly, neither the Loop class nor the deprecated
Factory class will try to use this event loop on PHP 7., (*51)
This event loop is known to trigger a readable listener only if
the stream becomes readable (edge-triggered) and may not trigger if the
stream has already been readable from the beginning.
This also implies that a stream may not be recognized as readable when data
is still left in PHP's internal stream buffers.
As such, it's recommended to use stream_set_read_buffer($stream, 0);
to disable PHP's internal read buffer in this case.
See also addReadStream() for more details., (*52)
~~ExtLibevLoop~~
Deprecated since v1.2.0, use ExtEvLoop instead., (*53)
An ext-libev based event loop., (*54)
This uses an unofficial libev extension,
that provides an interface to libev library.
libev itself supports a number of system-specific backends (epoll, kqueue)., (*55)
This loop does only work with PHP 5.
An update for PHP 7 is unlikely
to happen any time soon., (*56)
LoopInterface
run()
The run(): void method can be used to
run the event loop until there are no more tasks to perform., (*57)
For many applications, this method is the only directly visible
invocation on the event loop.
As a rule of thumb, it is usually recommended to attach everything to the
same loop instance and then run the loop once at the bottom end of the
application., (*58)
$loop->run();
This method will keep the loop running until there are no more tasks
to perform. In other words: This method will block until the last
timer, stream and/or signal has been removed., (*59)
Likewise, it is imperative to ensure the application actually invokes
this method once. Adding listeners to the loop and missing to actually
run it will result in the application exiting without actually waiting
for any of the attached listeners., (*60)
This method MUST NOT be called while the loop is already running.
This method MAY be called more than once after it has explicitly been
stop()ped or after it automatically stopped because it
previously did no longer have anything to do., (*61)
stop()
The stop(): void method can be used to
instruct a running event loop to stop., (*62)
This method is considered advanced usage and should be used with care.
As a rule of thumb, it is usually recommended to let the loop stop
only automatically when it no longer has anything to do., (*63)
This method can be used to explicitly instruct the event loop to stop:, (*64)
$loop->addTimer(3.0, function () use ($loop) {
$loop->stop();
});
Calling this method on a loop instance that is not currently running or
on a loop instance that has already been stopped has no effect., (*65)
addTimer()
The addTimer(float $interval, callable $callback): TimerInterface method can be used to
enqueue a callback to be invoked once after the given interval., (*66)
The second parameter MUST be a timer callback function that accepts
the timer instance as its only parameter.
If you don't use the timer instance inside your timer callback function
you MAY use a function which has no parameters at all., (*67)
The timer callback function MUST NOT throw an Exception.
The return value of the timer callback function will be ignored and has
no effect, so for performance reasons you're recommended to not return
any excessive data structures., (*68)
This method returns a timer instance. The same timer instance will also be
passed into the timer callback function as described above.
You can invoke cancelTimer to cancel a pending timer.
Unlike addPeriodicTimer(), this method will ensure
the callback will be invoked only once after the given interval., (*69)
$loop->addTimer(0.8, function () {
echo 'world!' . PHP_EOL;
});
$loop->addTimer(0.3, function () {
echo 'hello ';
});
See also example #1., (*70)
If you want to access any variables within your callback function, you
can bind arbitrary data to a callback closure like this:, (*71)
function hello($name, LoopInterface $loop)
{
$loop->addTimer(1.0, function () use ($name) {
echo "hello $name\n";
});
}
hello('Tester', $loop);
This interface does not enforce any particular timer resolution, so
special care may have to be taken if you rely on very high precision with
millisecond accuracy or below. Event loop implementations SHOULD work on
a best effort basis and SHOULD provide at least millisecond accuracy
unless otherwise noted. Many existing event loop implementations are
known to provide microsecond accuracy, but it's generally not recommended
to rely on this high precision., (*72)
Similarly, the execution order of timers scheduled to execute at the
same time (within its possible accuracy) is not guaranteed., (*73)
This interface suggests that event loop implementations SHOULD use a
monotonic time source if available. Given that a monotonic time source is
only available as of PHP 7.3 by default, event loop implementations MAY
fall back to using wall-clock time.
While this does not affect many common use cases, this is an important
distinction for programs that rely on a high time precision or on systems
that are subject to discontinuous time adjustments (time jumps).
This means that if you schedule a timer to trigger in 30s and then adjust
your system time forward by 20s, the timer SHOULD still trigger in 30s.
See also event loop implementations for more details., (*74)
addPeriodicTimer()
The addPeriodicTimer(float $interval, callable $callback): TimerInterface method can be used to
enqueue a callback to be invoked repeatedly after the given interval., (*75)
The second parameter MUST be a timer callback function that accepts
the timer instance as its only parameter.
If you don't use the timer instance inside your timer callback function
you MAY use a function which has no parameters at all., (*76)
The timer callback function MUST NOT throw an Exception.
The return value of the timer callback function will be ignored and has
no effect, so for performance reasons you're recommended to not return
any excessive data structures., (*77)
This method returns a timer instance. The same timer instance will also be
passed into the timer callback function as described above.
Unlike addTimer(), this method will ensure the callback
will be invoked infinitely after the given interval or until you invoke
cancelTimer., (*78)
$timer = $loop->addPeriodicTimer(0.1, function () {
echo 'tick!' . PHP_EOL;
});
$loop->addTimer(1.0, function () use ($loop, $timer) {
$loop->cancelTimer($timer);
echo 'Done' . PHP_EOL;
});
See also example #2., (*79)
If you want to limit the number of executions, you can bind
arbitrary data to a callback closure like this:, (*80)
function hello($name, LoopInterface $loop)
{
$n = 3;
$loop->addPeriodicTimer(1.0, function ($timer) use ($name, $loop, &$n) {
if ($n > 0) {
--$n;
echo "hello $name\n";
} else {
$loop->cancelTimer($timer);
}
});
}
hello('Tester', $loop);
This interface does not enforce any particular timer resolution, so
special care may have to be taken if you rely on very high precision with
millisecond accuracy or below. Event loop implementations SHOULD work on
a best effort basis and SHOULD provide at least millisecond accuracy
unless otherwise noted. Many existing event loop implementations are
known to provide microsecond accuracy, but it's generally not recommended
to rely on this high precision., (*81)
Similarly, the execution order of timers scheduled to execute at the
same time (within its possible accuracy) is not guaranteed., (*82)
This interface suggests that event loop implementations SHOULD use a
monotonic time source if available. Given that a monotonic time source is
only available as of PHP 7.3 by default, event loop implementations MAY
fall back to using wall-clock time.
While this does not affect many common use cases, this is an important
distinction for programs that rely on a high time precision or on systems
that are subject to discontinuous time adjustments (time jumps).
This means that if you schedule a timer to trigger in 30s and then adjust
your system time forward by 20s, the timer SHOULD still trigger in 30s.
See also event loop implementations for more details., (*83)
Additionally, periodic timers may be subject to timer drift due to
re-scheduling after each invocation. As such, it's generally not
recommended to rely on this for high precision intervals with millisecond
accuracy or below., (*84)
cancelTimer()
The cancelTimer(TimerInterface $timer): void method can be used to
cancel a pending timer., (*85)
See also addPeriodicTimer() and example #2., (*86)
Calling this method on a timer instance that has not been added to this
loop instance or on a timer that has already been cancelled has no effect., (*87)
futureTick()
The futureTick(callable $listener): void method can be used to
schedule a callback to be invoked on a future tick of the event loop., (*88)
This works very much similar to timers with an interval of zero seconds,
but does not require the overhead of scheduling a timer queue., (*89)
The tick callback function MUST be able to accept zero parameters., (*90)
The tick callback function MUST NOT throw an Exception.
The return value of the tick callback function will be ignored and has
no effect, so for performance reasons you're recommended to not return
any excessive data structures., (*91)
If you want to access any variables within your callback function, you
can bind arbitrary data to a callback closure like this:, (*92)
function hello($name, LoopInterface $loop)
{
$loop->futureTick(function () use ($name) {
echo "hello $name\n";
});
}
hello('Tester', $loop);
Unlike timers, tick callbacks are guaranteed to be executed in the order
they are enqueued.
Also, once a callback is enqueued, there's no way to cancel this operation., (*93)
This is often used to break down bigger tasks into smaller steps (a form
of cooperative multitasking)., (*94)
$loop->futureTick(function () {
echo 'b';
});
$loop->futureTick(function () {
echo 'c';
});
echo 'a';
See also example #3., (*95)
addSignal()
The addSignal(int $signal, callable $listener): void method can be used to
register a listener to be notified when a signal has been caught by this process., (*96)
This is useful to catch user interrupt signals or shutdown signals from
tools like supervisor or systemd., (*97)
The second parameter MUST be a listener callback function that accepts
the signal as its only parameter.
If you don't use the signal inside your listener callback function
you MAY use a function which has no parameters at all., (*98)
The listener callback function MUST NOT throw an Exception.
The return value of the listener callback function will be ignored and has
no effect, so for performance reasons you're recommended to not return
any excessive data structures., (*99)
$loop->addSignal(SIGINT, function (int $signal) {
echo 'Caught user interrupt signal' . PHP_EOL;
});
See also example #4., (*100)
Signaling is only available on Unix-like platforms, Windows isn't
supported due to operating system limitations.
This method may throw a BadMethodCallException if signals aren't
supported on this platform, for example when required extensions are
missing., (*101)
Note: A listener can only be added once to the same signal, any
attempts to add it more than once will be ignored., (*102)
removeSignal()
The removeSignal(int $signal, callable $listener): void method can be used to
remove a previously added signal listener., (*103)
$loop->removeSignal(SIGINT, $listener);
Any attempts to remove listeners that aren't registered will be ignored., (*104)
addReadStream()
Advanced! Note that this low-level API is considered advanced usage.
Most use cases should probably use the higher-level
readable Stream API
instead., (*105)
The addReadStream(resource $stream, callable $callback): void method can be used to
register a listener to be notified when a stream is ready to read., (*106)
The first parameter MUST be a valid stream resource that supports
checking whether it is ready to read by this loop implementation.
A single stream resource MUST NOT be added more than once.
Instead, either call removeReadStream() first or
react to this event with a single listener and then dispatch from this
listener. This method MAY throw an Exception if the given resource type
is not supported by this loop implementation., (*107)
The second parameter MUST be a listener callback function that accepts
the stream resource as its only parameter.
If you don't use the stream resource inside your listener callback function
you MAY use a function which has no parameters at all., (*108)
The listener callback function MUST NOT throw an Exception.
The return value of the listener callback function will be ignored and has
no effect, so for performance reasons you're recommended to not return
any excessive data structures., (*109)
If you want to access any variables within your callback function, you
can bind arbitrary data to a callback closure like this:, (*110)
$loop->addReadStream($stream, function ($stream) use ($name) {
echo $name . ' said: ' . fread($stream);
});
See also example #11., (*111)
You can invoke removeReadStream() to remove the
read event listener for this stream., (*112)
The execution order of listeners when multiple streams become ready at
the same time is not guaranteed., (*113)
Some event loop implementations are known to only trigger the listener if
the stream becomes readable (edge-triggered) and may not trigger if the
stream has already been readable from the beginning.
This also implies that a stream may not be recognized as readable when data
is still left in PHP's internal stream buffers.
As such, it's recommended to use stream_set_read_buffer($stream, 0);
to disable PHP's internal read buffer in this case., (*114)
addWriteStream()
Advanced! Note that this low-level API is considered advanced usage.
Most use cases should probably use the higher-level
writable Stream API
instead., (*115)
The addWriteStream(resource $stream, callable $callback): void method can be used to
register a listener to be notified when a stream is ready to write., (*116)
The first parameter MUST be a valid stream resource that supports
checking whether it is ready to write by this loop implementation.
A single stream resource MUST NOT be added more than once.
Instead, either call removeWriteStream() first or
react to this event with a single listener and then dispatch from this
listener. This method MAY throw an Exception if the given resource type
is not supported by this loop implementation., (*117)
The second parameter MUST be a listener callback function that accepts
the stream resource as its only parameter.
If you don't use the stream resource inside your listener callback function
you MAY use a function which has no parameters at all., (*118)
The listener callback function MUST NOT throw an Exception.
The return value of the listener callback function will be ignored and has
no effect, so for performance reasons you're recommended to not return
any excessive data structures., (*119)
If you want to access any variables within your callback function, you
can bind arbitrary data to a callback closure like this:, (*120)
$loop->addWriteStream($stream, function ($stream) use ($name) {
fwrite($stream, 'Hello ' . $name);
});
See also example #12., (*121)
You can invoke removeWriteStream() to remove the
write event listener for this stream., (*122)
The execution order of listeners when multiple streams become ready at
the same time is not guaranteed., (*123)
removeReadStream()
The removeReadStream(resource $stream): void method can be used to
remove the read event listener for the given stream., (*124)
Removing a stream from the loop that has already been removed or trying
to remove a stream that was never added or is invalid has no effect., (*125)
removeWriteStream()
The removeWriteStream(resource $stream): void method can be used to
remove the write event listener for the given stream., (*126)
Removing a stream from the loop that has already been removed or trying
to remove a stream that was never added or is invalid has no effect., (*127)
Install
The recommended way to install this library is through Composer.
New to Composer?, (*128)
This project follows SemVer.
This will install the latest supported version:, (*129)
composer require react/event-loop:^1.5
See also the CHANGELOG for details about version upgrades., (*130)
This project aims to run on any platform and thus does not require any PHP
extensions and supports running on legacy PHP 5.3 through current PHP 8+ and
HHVM.
It's highly recommended to use the latest supported PHP version for this project., (*131)
Installing any of the event loop extensions is suggested, but entirely optional.
See also event loop implementations for more details., (*132)
Tests
To run the test suite, you first need to clone this repo and then install all
dependencies through Composer:, (*133)
composer install
To run the test suite, go to the project root and run:, (*134)
vendor/bin/phpunit
License
MIT, see LICENSE file., (*135)
More
Wallogit.com
